Remington 700:
Also fits the Remington model 721 and 722 & Bergara B14. Right hand mount fits right hand firearms and left hand mounts fit left hand firearms.
MOA Mounts are tapered down on front for long range shooting. Height will be about .03″ lower on front ring than a standard mount.
Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64″ Allen wrench.
Some of the .338 Lapua receivers have been modified at the factory and have larger base screws. The size of them is 8-40 and will use a 9/64 Allen wrench. Check your gun and see because the mount will have to be modified. Choose Model 700 (8-40 screws) if your gun uses the larger 8-40 screws.
Short action – Outside to outside of rings is 4.26″ for standard ring mounts. Standard rings are .63″ wide and have 2 ring screws per ring. Tactical rings are .80″ wide and have 4 ring screws per ring. 4 Hole to hole spacing dimensions are .86″, 3.63″, .60″. Height of mounts from top of receiver to centerline of scope tube is – low .98″, medium 1.11″, and high 1.23″.
Long action – Outside to outside of rings is 4.62″ for standard ring mounts. Standard rings are .63″ wide and have 2 ring screws per ring. Tactical rings are .80″ wide and have 4 ring screws per ring. 4 Hole to hole spacing dimensions are .86″, 4.48″, .60″. Height of mounts from top of receiver to centerline of scope tube is – low .98″, medium 1.11″, and high 1.23″.
Remington 783:
Mount fits both left and right hand firearms.
Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64″ Allen wrench.
Short action – Outside to outside of rings is 4.20″. Standard rings are .63″ wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .86″, 3.25″, .86″. Height of mounts from top of receiver to centerline of scope tube is – low .92″, medium 1.05″, and high 1.17″.
Long action – Outside to outside of rings is 4.50″. Standard rings are .63″ wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .86″, 3.54″, .86″. Height of mounts from top of receiver to centerline of scope tube is – low .92″, medium 1.05″, and high 1.17″. (Same as Ruger American Long Action)
Remington Model 7 (mounts fit 3 and 4 hole guns):
Fits the Remington model 600.
Mount fits right hand firearms.
Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64″ Allen wrench.
Outside to outside of rings is 3.97″. Standard rings are .63″ wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .86″, 3.35″, .28″. Height of mounts from top of receiver to centerline of scope tube is – X low .86″, low .98″, medium 1.11″, and high 1.23″.
Remington 7400,7600,7615,750:
Mount fits both left and right hand firearms.
Base screws are 8-40 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Base screws use a 9/64″ Allen wrench and ring screws use a 7/64″ Allen wrench.
Outside to outside of rings is 3.92″. Standard rings are .63″ wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .60″, 2.05″, .86″. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and high 1.19″.
Remington 770,710,715:
Mount fits both left and right hand firearms.
Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64″ Allen wrench.
Outside to outside of rings is 4.26″. Standard rings are .63″ wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .75″, 2.46″, .75″. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and high 1.19″.
Remington 742, 760:
Mount fits both left and right hand firearms.
Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64″ Allen wrench.
Outside to outside of rings is 3.92″. Standard rings are .63″ wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are ..60″, 1.65″, .86″. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and high 1.19″.
Remington 597:
Mount fits both left and right hand firearms.
Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64″ Allen wrench.
Outside to outside of rings is 3.92″. Standard rings are .63″ wide and have 2 ring screws per ring. 3 Hole to hole spacing dimensions are .1.00″, 1.00″. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and high 1.19″.
Remington Shotgun:
Mount fits both left and right hand firearms.
Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64″ Allen wrench.
Outside to outside of rings is 4.24″. Standard rings are .63″ wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are 1.41″, 1.48″, .1.41″. Height of mounts from top of receiver to centerline of scope tube is – low .94″.
Remington Genesis:
Base screws are 8-40 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Base screws use a 9/64″ Allen wrench and ring screws use a 7/64″ Allen wrench.
Outside to outside of rings is 4.00″. Standard rings are .63″ wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .86″, 1.27″, .86″. Height of mounts from top of receiver to centerline of scope tube is – medium 1.13″, and high 1.25″.
- Precision machined from a solid block of top-grade billet 6061T6 aluminum
- Custom made to fit each type of firearm and align perfectly with your rifle’s receiver
- No moving parts between the firearm and the scope
- 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
