Game Reaper 2

$59.85$136.50

Clear selection
PART :
UPC CODE :
Customer Rating (0) Submit a Review
SKU: HMSS Category:

Weight of most all Game Reaper 2 mounts are 2 to 3 ounces. Depends on height, style, and size. Material is 6061T6 Aluminum.


Browning A Bolt 3 mounts are machined to accommodate 8-40 base screws. Some Savage Round Receiver Guns and Savage Axis Guns are drilled and tapped with 8-40 base screw holes and will fit the Browning A-Bolt 3 Game Reaper 2 piece mount. Please check your gun to make sure what size holes are in the receiver before you order.

Base screws are 8-40 X 1/4″ long and use a 9/64 Allen wrench. Ring screws are 6-40 X 5/8″ long and use a 7/64 Allen wrench.

All Game Reaper 2 piece 30MM mounts are tactical meaning that the number of ring screws are 4 on each end of the mount.

Tactical rings are .80″ wide.

These will accommodate left or right handed and short or long action guns.

Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and High 1.19″.


Browning A Bolt, Sako A7, Steyr (fits long and short actions):

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount and back mount are .86″. Both mounts are the same part. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and High 1.19″.


 

Browning X Bolt (fits all action lengths):

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount and back mount are .70″. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and High 1.19″.


Howa 1500 & MINI, Mauser M18, Mossberg 100ATR, 4X4, Patriot, MVP, NOSLER M48, Weatherby Vanguard, Remington 700,721,722,725 (fits all action lengths) BERGARA B14. FRANCHI MOMENTUM:

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount is .86″ and on back mount it is .60″. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – X low .86, low .98″, medium 1.10″, and High 1.23″.


 

Marlin XL7, XS7, Winchester 70 (fits Long action, WSM, and Short actions):

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front and back mount is .86″. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .92″, medium 1.05″, and High 1.17″.


 

Savage Flatback Receiver (Fits 2003 and older long and short actions):

Front of receiver is rounded and back is flat where mounts attach.

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front and back mount are .86″. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .92″, medium 1.05″, and High 1.17″.


Savage A17 30MM fits the Savage 2 piece 30mm mounts.
Savage Round Receiver (2004 and newer guns) Model 10,11,12,14,16,110,111,112,114,116,212,220, Savage A17, Savage Axis, Stevens 200, CVA Cascade, Ruger American Centerfire, Remington 783 (fits long and short actions):

Front and back of receiver are rounded where mounts attach.

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount and back mount are .86″. Both mounts are the same part. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .92″, medium 1.05″, and High 1.17″.


Thompson Center Venture (fits long and short actions):

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount and back mount are .88″. Both mounts are the same part. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and High 1.19″.


TIKKA T3, T3X, T1X, 595, 695, Whitetail Hunter (fits long and short actions):

Mounts fit flat top receivers that are drilled and tapped.

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount and back mount are .86″. Both mounts are the same part. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and High 1.19″.


Weatherby 9 Lug Magnum

Weatherby 9 Lug Magnum mounts

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on the mount are for the front 2 holes .862″ and the back 2 holes .602″. There will be a FH stamped on the front end of the mount and a BH stamped on the back end.

Standard rings are .63″ wide. Standard rings have 2 screws per ring. Height of mounts from top of receiver to centerline of scope tube is -low .98″, medium 1.10″, and High 1.23″.


  • Game Reaper 2 signature series two piece scope mounts
  • Fits long and short actions, some super short actions – left and right hand guns
  • Custom made to fit each type of firearm and align perfectly with your rifle’s receiver
  • Each ring and base is machined from a solid block of top-grade billet 6061T6 aluminum
  • Internal ring and base design allows for extra eye relief adjustment
  • Eliminates or reduces scope damage from tightening rings
  • No lapping required.
  • Approximately 1/3 the weight of steel
  • Eliminates the need for windage screws that can work loose and cause problems
  • No moving parts between the firearm and the scope
  • Up to four times the threads of other mounts for absolute strength and security
  • Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
  • Made in the USA
Weight 1 kg
Make

, , , , , , , , , , , , , , , , , , , ,

Size

, ,

Height

, , , ,

Number of Screws per Ring

,

Color

,

Action