Hm.png
2SF1M701M2SW1M2XB1M2

Hunt Masters

$57.00$130.00

Clear selection
PART :
UPC CODE :
Customer Rating (0) Submit a Review
SKU: HMSS.

Browning A Bolt, Sako A7, Steyr (fits long and short actions):

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount and back mount are .86″. Both mounts are the same part. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and High 1.19″.


 

Browning X Bolt (fits all action lengths):

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount and back mount are .70″. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and High 1.19″.


Howa 1500, Mossberg 100ATR, 4X4, Patriot, MVP, Weatherby Vanguard, Remington 700,721,722,725 (fits all action lengths):

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount is .86″ and on back mount it is .60″. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – X low .86, low .98″, medium 1.10″, and High 1.23″.


 

Marlin XL7, XS7, Winchester 70 (fits Long action, WSM, and Short actions):

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front and back mount is .86″. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .92″, medium 1.05″, and High 1.17″.


 

Savage Flatback Receiver (Fits 2003 and older long and short actions):

Front of receiver is rounded and back is flat where mounts attach.

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front and back mount are .86″. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .92″, medium 1.05″, and High 1.17″.


Savage A17 30MM fits the Savage 2 piece 30mm mounts.
Savage Round Receiver (2004 and newer guns) Model 10,11,12,14,16,110,111,112,114,116,212,220, Savage A17, Savage Axis, Stevens 200, Ruger American Centerfire, Remington 783 (fits long and short actions):

Front and back of receiver are rounded where mounts attach.

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount and back mount are .86″. Both mounts are the same part. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .92″, medium 1.05″, and High 1.17″.


Thompson Center Venture (fits long and short actions):

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount and back mount are .88″. Both mounts are the same part. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and High 1.19″.


TIKKA T3, 595, 695, Whitetail Hunter (fits long and short actions):

Mounts fit flat top receivers that are drilled and tapped.

Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64 Allen wrench.

Hole spacing dimensions on front mount and back mount are .86″. Both mounts are the same part. Standard rings are .63″ wide and Tactical rings are .80″ wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .94″, medium 1.06″, and High 1.19″.


 

  • Hunt Masters signature series two piece scope mounts
  • Fits long and short actions, some super short actions – left and right hand guns
  • Custom made to fit each type of firearm and align perfectly with your rifle’s receiver
  • Each ring and base is machined from a solid block of top-grade billet aluminum
  • Internal ring and base design allows for extra eye relief adjustment
  • Eliminates or reduces scope damage from tightening rings
  • Approximately 1/3 the weight of steel
  • Eliminates the need for windage screws that can work loose and cause problems
  • No moving parts between the firearm and the scope
  • Up to four times the threads of other mounts for absolute strength and security
  • Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
  • Made in the USA
Make

Barrett Fieldcraft Tactical (Fits any action RH or LH), BROWNING A BOLT 3, Browning A-Bolt, Sako A7, Steyr (Fits Long & Short Action), Browning X-Bolt (Fits Long & Short Action), Howa 1500, Howa Mini, Mossberg 100ATR, 4×4, Patriot, Weatherby Vanguard, Remington 700, 721, 722, 725, Marlin X7, XS7, Winchester 70,Fits Long, Short & WSM Actions) Will not fit SSA or WSSM, Savage Flatback Receiver (Fits 2003 & Older, Long & Short Action), Savage Round Receiver, Axis, Stevens 200, Ruger American Rifle, Remington 783, Savage A17 (Fits Long & Short Action, Left & Right Hand), Thompson Center Venture (Long & Short Action), Tikka T3, 595, 695, Whitetail Hunter (Fits Long & Short Action), WINCHESTER XPR

Model

LH or RH, Mounts fit flat top receivers that are drilled and tapped., Mounts fit Long & Short action guns, Mounts fit Long,Short, & WSM action guns., Mounts will not fit SSA or WSSM action guns., Normal

Size

1 INCH, 30 MM, 34 MM

Height

High, Low, Medium, X – Low

Number of Screws per Ring

2, 4

Color

Black, Silver

Action

Any Action, Mini Action, N/A

Reviews

There are no reviews yet.

Be the first to review “Hunt Masters”