Benelli2
GR BlackGR Silver

Game Reaper – Winchester

$65.00$135.00

Clear selection
PART :
UPC CODE :
Customer Rating (2)
5.00 out of 5
Submit a Review
SKU: N/A. Category: .

Winchester 70:
*Also fits 2009 and newer short action receivers*
Look at hole to hole measurements below before ordering!

Mounts fit right hand firearms.

Base screws are 6-48 X 1/4″ long and ring screws are 6-40 X 5/8″ long. Both screws use a 7/64″ Allen wrench.

WSSM action – Outside to outside of rings is 3.82″. Standard rings are .63″ wide and have 2 ring screws per ring.  4 Hole to hole spacing dimensions are .86″, 3.23″, .50″. Height of mounts from top of receiver to centerline of scope tube is -  low .92″, medium 1.05″, and high 1.17″.

Short action – Outside to outside of rings is 3.92″. Standard rings are .63″ wide and have 2 ring screws per ring.  4 Hole to hole spacing dimensions are .86″, 3.27″, .86″. Height of mounts from top of receiver to centerline of scope tube is -  low .92″, medium 1.05″, and high 1.17″.

WSM action – Outside to outside of rings is 4.18″ on standard ring mounts. Standard rings are .63″ wide and have 2 ring screws per ring.  Tactical rings are .80″ wide and have 4 screws per ring. 4 Hole to hole spacing dimensions are .86″, 3.53″, .86″. Height of mounts from top of receiver to centerline of scope tube is -  low .92″, medium 1.05″, and high 1.17″.

Long action – Outside to outside of rings is 4.46″ on standard ring mounts. Standard rings are .63″ wide and have 2 ring screws per ring.  Tactical rings are .80″ wide and have 4 screws per ring. 4 Hole to hole spacing dimensions are .86″, 3.81″, .86″. Height of mounts from top of receiver to centerline of scope tube is -  low .92″, medium 1.05″, and high 1.17″.


 

  • Precision machined from a solid block of top-grade billet aluminum
  • Custom made to fit each type of firearm and align perfectly with your rifle’s receiver
  • No moving parts between the firearm and the scope
  • 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
  • Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
  • Made in the USA
Model

70, 70 Tactical, 70 Tactical-20MOA, Model 70, XPR Right Hand

Size

1 INCH, 30 MM

Action

Long Action, Safari Action, Short Action, WSM – Action, WSSM – Action

Height

High, Low, Medium

Color

Black, Silver

2 reviews for Game Reaper – Winchester

  1. RALPH R BECKER
    5 out of 5

    (verified owner):

    I was totally impressed with the quality,fit,and look of my “GAME REAPER” .The fit on my Winchester 70(shadow hunter stainless )was to say the least perfect,the finish was flawless ,and my Vortex 3x12x42 set in with no lapping (I always hand fit).The screws are solid ,the threads clean and chased holding the scope tube solid.The only thing that you might find is silver is brighter than Winchester’s stainless in color.I Look forward to many years of trouble free service.Thanks Vanessa and DNZ for your help and customer service.

  2. Robert M
    5 out of 5

    :

    Rock solid, American made, one piece that mounts directly to the top of the receiver without the need for additional rails, adapters, and other mechanical connections which are prone to loosening up and allowing your point of impact to shift under heavy recoil such as that of my Model 70 .300 WinMag. Installs and levels with ease in minutes without the use of special tools, but you can use the DNZ Nevel and have the scope leveled and ready to be tightened down in 1/2 second. In my experience so far, these do not have to be lapped at all.

    I will never use another mount again. I am even considering buying DNZ mounts for rifles I don’t even own yet :)

Add a review